Application
Designed for high efficiency liquid removal, this separator is ideal for dehydration, product recovery, product gathering, elimination of corrosive liquids and protection of compressors and related equipment.

Performance
99.99% of all droplets larger 8μm for gas flows varying from 30 to 100%.
And the quality of vapor in case of steam can be 99.9%.

Design
Designed for maximum removal of large amounts of liquids and to arrest liquid slugs at lower pressure drop.
It consists of double pocket vane blades, draining downward.

Application
Designed for high efficiency liquid and solid removal with economical design, this separator is ideal for natural gas, steam piping line, geothermal power generation and evaporation can separation.

Performance
99% of all droplets larger 10μm.
98% of all solids larger 10μm.

Design
Designed for maximum performance at low pressure drop.
Designed for maximum removal of large amounts of liquids and solids. It consists of a cone shaped multi blade element and swirl flow blades which prevent re-entrainment.

Application
Used for the highest degree of separation of liquids and solids in natural gas and chemical plant product gathering.

Performance
99.99% of all droplets larger 3μm and 99% of all solids particles 0.5-3μm for gas flows varying from 10 to 110%.

Design
Multistage design:
Inlet chamber to knock out slugs and large particles, plus filter cartridges for solids removal and coalescence of small droplets.
The final separation stage is designed for each specific application, and may use Burgess Miura vanes or coalescing cartridges.

Application
High efficiency separation of liquids and solids in the natural gas and chemical processing industries.

Performance
99.99% of all droplets larger 8μm.
99.99% of all solids larger 5μm.

Design
Large capacity separator, self-cleaning, does not require scrubbing liquid, can handle slugs and large quantities of entrainment.
The fixed or removable cyclone bundle can be equipped with tubes of different sizes..